PS3 The PS3 Yellow Light of Dead (or YLOD) as well as The PS3 Red Light of Death are likely to be two of the most frequently reported issues that affect PS3 consoles. PS3 console.
In this article, I will briefly describe the sequence of indicators in the PS3 console you have to be looking for that will confirm that your console suffers from The Yellow Light of Death or the red indicator fault. The reason why these faults happen in the first place and the best way to minimize, avoid or solve the issue is to get rid of a possible catastrophic failure of your gaming console, which could cost you at the very least several hundred dollars to repair.
It’s unfortunate, but the truth is that PS3 issues are not an uncommon issue, and the flashing Yellow Light fault probably is the most severe and common issue. It is believed that a lot of the issues that plague the PS3 console are caused by a bug in its design which makes it susceptible to failure.
PS3 yellow light of death
When the console’s power status indicator flickers or flashes between yellow and green, and then back to green, it is referred to as “yellow the light that dies”. If you notice the power status light flashes red after you use your console for three or more minutes, and the console shuts down, you’re likely to be experiencing the death light in red.
It’s generally believed that the root reason for”the Yellow Light of Death is due to the processor becoming too hot when it is used for an extended period in the gaming console. The minor soldering marks on the GPU melts and eventually cease to be connected to the motherboard.
Older PS3s are more susceptible to YLOD. It’s thought that this could be due to older processors that are less efficient and produce more heat than modern PS3 models. Sony’s official explanation for Sony However, the official line is that the yellow warning light may be caused due to a variety of reasons and without offering any proof.
What we know from the numerous PS3 owners who have encountered the YLOD problem can be that the one solution that consistently works is opening the PS3 console and using the heat gun to warm the GPU / CPU and directly chipsets.
In a small percentage of cases, it is possible that the YLOD warning could be caused by a defective power supply, which is stopping the console from booting up. To find out what’s causing the YLOD issue, turn the console off and let it cool for a minimum of 20 minutes. Turn the console back on and pay attention to the sound of the fan. If the fan is briefly but then switches off again, then you might be experiencing a problem with your motherboard. If you can’t hear the fan at the start of the process and then the issue is related to your power source.
PS3 Light of Death Light of Death
The red light error could be caused by overheating, but it could be due to the failure of a hard drive. Based on how frequently you play the PS3 and how well you take care of it, the hard drive should be able to last between 3 and five years.
Of two, YLOD will be more dangerous because it is more likely to signal an internal problem that requires a professional repair. The flashing red light, on the other hand, is usually a sign of more serious internal issues. If you’re seeing an indicator light that is red, it’s not all lost. Even when you see an alert lamp that is yellow, you could still be able to recover your PS3 console if you notice it in time.
We know that a lot of the issues that occur due to the PS3 are caused by excessive heat, mainly if the console is in use for extended durations of time. Here are a few suggestions on what you can do to avoid any severe damage:
Check that the vents for air on consoles aren’t blocked by any means.
Make sure you have at minimum 4 inches of space on both edges from the PlayStation 3 for adequate ventilation.
Take your PlayStation console from cabinets and keep it away from any other stacks of electrical appliances, and don’t put it in corners of the room because these places encourage heating.
Look for the dust around the vents for air and within the console since it can block the PS3 of air and prevent its cooling. This could cause a fan to fail.
7 Steps to Retrieving YLOD or Red Light of Death PS3 Errors
If your PS3 isn’t working due to a YLOD (or Red Light error, This is a quick outline of what you could do to fix the functionality of your PS3 console:
Shut off the PS3 console, as well as the other PS3 peripherals.
Unplug the console and allow it to cool in a ventilated area.
Remove all dust from the site and run the “PS3 Test for Fan”.
Reconnect cables, making sure that you test the connections and ropes to ensure that they aren’t damaged or loose.
Do “PS3 Secure Mode” and then reboot your PS3 system. This is especially important in the event that your PS3 is not able to boot.
Make sure to check the PS3 System settings and confirm that you are running the most recent Software download updates.
The final method for troubleshooting is what’s known as the PS3 reset for the heard drive and involves simply taking out the cassette from the hard drive and then reinstalling it.